ISSUE 190 MARCH 2020     Sign Update 45

extremely easy to use internal aluminium directional/information system; NovaSlat incorporates five extruded slats at 40, 60, 80, 100 and 150mm depths. A wall track fitted at either end allows for planks to be offered into the profile from the top and

simply stacked to produce the desired format before closing off with the track end cap. Wall mounted signs up to 1200mm in width can be produced using NovaSlat.

which also accepts a 2mm rigid sheet using VHB tape. This section works with any of the round posts; the location pin is not required as the profile has been extruded with the same seating arrangement as the reversable adaptor so will slide into the post, allowing for a competitive option for single sided smaller signs. The profile we call Box 78 offers the opportunity to produce small to medium sized, flat faced monolith signs with a simple but very effective solution. Again, using a 2mm rigid sheet such as aluminium or ACM which is bonded to the profiles front edges using VHB tape gives a flush neat appearance to the visual area. Both the D or square posts can be used with Box 78 and panels can be fret cut and internally illuminated if required.   An additional post is available, again at 78mm which is a utility post. This sturdy round profile can be used in wide range of applications including adapting any of the systems double sided planks for finger post signage when used with the aforementioned V carrier. The post has 10 slots which will accept an M6 bolt head and has an inherent strength due to its design. Nova supplies an

All the systems planks and header panels are secured snugly and easily into the posts with no unsightly fixing method on show.